Caviblaster 1325-G Руководство по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Оборудование для уборки Caviblaster 1325-G. Caviblaster 1325-G 13 страниц.
Печатать страницуcart on the handle (Figure 9). Ensure that the knob on the plug is facing up and mates with the notch in
the outlet cover.
If the plug is engaged upside down, the pump will turn in reverse.
hose is connected to the pressure pump, the feed pump is submerged in water, and the wiring splice is
kept dry prior to starting the feed pump.
Note: The feed pump has had a neoprene check valve installed in the discharge. This valve will prevent water from
draining out of the feed hose through the feed pump when the pump is turned off. However, this check valve
somewhat restricts the flow of water from the pump. If maximum water flow is required from the feed pump, the
check valve and stainless retaining washer can be removed from the pump discharge by removing the black hose
barb fitting.
When feeding the CaviBlaster
volume of greater than 13 gallons per minute at a maximum pressure of
source to the inlet of the pressure pump (Figure 10).
pressure pump and the water is on prior to starting the pressure pump.
For More information please email [email protected] or call 1-(352)275-5319
Either fresh water or seawater can be used with this system.
®
with an alternate water source,
Figure 9
CaviBlaster 1325-G Operations Manual
Figure 7
the source must supply water at a
Ensure that the feed hose is connected to the
Page - 3
Ensure that the feed
70-psi. Connect the water
Figure 10