Datacom Systems 4X16SP-1000BT Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Переключатель Datacom Systems 4X16SP-1000BT. Datacom Systems 4X16SP-1000BT 20 страниц. Copper gigabit span switch
Также для Datacom Systems 4X16SP-1000BT: Технический паспорт (1 страниц)

Печатать страницу

Front Panel Description —

Gigabit SPAN switch front panel. This is the location for all network cable connec-

tions and status LEDs.

Figure 2 - 4X16SP-1000BT Front Panel

An explanation of each panel legend follows:

POWER 1 & 2 — Two power source circuit connections are provided. Use of a second different external

power source circuit than the first is strongly recommended to assure uninterrupted oper-

ation. Furthermore, connecting the second power source circuit to a different external

power source circuit than the first helps to eliminate power as a single point of failure. The

POWER 1 and 2 LEDs illuminate indicating power 1 and 2, respectively, are on. Either LED

not illuminated indicates a lack of power and immediate investigation is required to insure

redundant power integrity.

GRAPHIC DISPLAY — This scrolling graphic displays 4X16SP-1000BT Copper Giagbit Switch power-on and

operating status information.

MANAGEMENT PORT — This port is used for remote 4X16SP-1000BT Copper Giagbit Switch control with an

RJ45 connector connection to the network. These connectors have integrated LEDs

that display status of each port. See Table 1 for LED display.

Left LED — Notch Up

Solid Green — Link

Flashing Green — Data

Green — 1,000 Mbs

Orange — 100 Mbs

OFF — 10 Mbs

Left LED — Notch Down

Table 1 - LED Display

4X16SP-1000BT Copper Gigabit SPAN Switch • USERguide

Figure 2 illustrates the Copper

LED Display

NOTCH UP

Right LED — Notch Up

Green — 1,000 Mbs

Orange — 100 Mbs

OFF — 10 Mbs

Solid Green — Link

Flashing Green — Data

NOTCH DOWN

Right LED — Notch Down

Datacom Systems Inc

WITH LINK OR DATA