4IPNET EAP750 V1.00 Руководство по быстрой установке - Страница 14

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Беспроводная точка доступа 4IPNET EAP750 V1.00. 4IPNET EAP750 V1.00 15 страниц. Enterprise access point

Печатать страницу

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAP750 supports up to 4 WDS links for connecting wirelessly to other

WDS-capable APs (peer APs). By default, all WDS profiles are disabled.

 Click on the Wireless button on the main menu.

 Select the Repeater Settings tab.

 Choose WDS as the Repeater Type.

 Choose the desired WDS profile:

(a) Enable WDS.

(b) Enter the MAC Address (peer AP) and then Click SAVE.

If you are using another EAP750 as the peer AP, simply repeat the above-mentioned steps to configure

another peer AP(s).

On each and every configuration page, you may click SAVE to save the changes of your configured

settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the



Note:

following message will appear: "Some modifications have been saved and will take effect after

Reboot."

Congratulations!

Now, 4ipnet EAP750 is installed and configured successfully.

EAP750 Enterprise Access Point

Quick Installation Guide

ENGLISH