Elsema iS300 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Открыватель ворот Elsema iS300. Elsema iS300 12 страниц. Swing gate opener

C. INSTALLATION OF REAR BRACKET

Step 1 : Calculate the position of the rear bracket by using the details in Figure 1 and Graph 2. This Figure

and Graph establishes dimensions

you can also use values for greater than 90˚ from Graph 2.

Step 2 : Before securing the rear bracket to the pillar check the front bracket can be welded to a solid point

on the gate leaf.

 Fully close the gate.

 Connect the rear and front brackets to the motor.

 Hold the rear bracket onto the pillar with the calculated A and B values.

 Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for

the front bracket.

Step 3 : Then fix the rear bracket to the pillar.

Figure 1

and the

iS300/iS300D/iS300Solar SWING GATE OPENER MANUAL

maximum opening angle

. If your gate is opening 90˚

Graph 2