Elsema G-2000 Руководство - Страница 8
Просмотреть онлайн или скачать pdf Руководство для Приемник Elsema G-2000. Elsema G-2000 13 страниц. 3g receiver with relay output for opening sliding, swing gates, doors or switching devices
Печатать страницу
It is strongly recommended that the first 6 numbers are mobile numbers (not landline). If inputs 1 & 2
are used and is activated, an SMS message will be sent to the first 6 stored numbers (serial numbers
001-006).
Power failure SMS will only be sent to the user in location 001
Check which mobile number is located at a particular location (Serial number)
PwdAserial number#
o
E.g If the user wants to see which number is stored on position 30 (serial number 30), the following SMS
command is needed:
1234A030#
Check users in multiple locations
PwdALserial number start#serial number end#
o
E.g If the user wants to see which numbers is stored on position 100 to 200, the following SMS command is
needed:
1234AL100#200#
Delete a user
PwdAserial number##
o
E.g A user on position 13 (serial number 13) has to be deleted from the user list, the following SMS
command is needed:
1234A013##
It is recommended to keep a list of all users and their numbers position
If a new number is programmed on a location which already has a number stored, the old number will be deleted
and the new number is stored.
Allow access to all numbers calling the G-2000
PwdALL#
o
To allow access to anyone making a call to the G-2000, the following SMS command is needed:
Warning! This will allow anyone who makes a call to operate the G-2000
1234ALL#
Allow access only to authorized numbers calling the G-2000
PwdAUT#
o
To allow access to authorized numbers only, the following SMS command is needed:
1234AUT#
This allows only the numbers that are authorized to operate the G-2000.
*This is set as factory default and is recommended for secure operation.
www.elsema.com
Page 8
ELSEMA
3G Receiver with relay output, G-2000