Elsema GIGALINK GLR2702240E Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Приемник Elsema GIGALINK GLR2702240E. Elsema GIGALINK GLR2702240E 7 страниц. 2-channel 27mhz receiver with main ac supply
Печатать страницуFour billion codes
The user can easily change the code on all the channels. Momentary joining the two CC pins on the receiver
board sets all channels to one random code. One of 4,294,967,296 possibilities is selected.
Code Programming
For code programming, please refer to the separate programming instructions.
When programming is completed and the GIGALINK cable is removed from the receiver-coding socket, the 2-
way dip switch is used to select different output modes. This is described below.
Output Modes
Relay output on the receiver can function in either momentary or latching mode. By default the mode is set to
momentary. Modes selectable from the 2-way dipswitch. Dipswitch 1 corresponds to relay channel 1 and
dipswitch 2 corresponds to relay channel 2.
Factory Default = Momentary
Momentary - Output is active for as long as the transmitter button is pressed.
This is a standard mode on most automatic gates or garage door openers.
Latching
- Output remains active until next press of the transmitter button.
Similar to switching "on" and "off" a light.
Security
- Output remains active until power to the receiver is removed. Similar to security alarms
Latching
and fire alarms.
Customised Software
Custom output modes can be programmed to do special functions. Call Elsema for more details.
240 AC Supply, Antenna and Relay Connections
AC power supply and relay connections are via
pluggable type terminal
damage the microcontroller.
Applications
The receiver output can be set to different modes which allows it to be used in many diverse applications such
as automatic gates, security, timer controlled outputs and simple on/off functions etc.
Unique Code System
The microcontroller EEPROM allows large volume users to have a unique code. This enables Elsema to offer
everyone "your own" radio control.
block. Do not connect the supply to the 2.5-mm coding socket since connection will
2-Channel 27MHz Receiver with 16A Relay Output- GLR2702240
the pluggable type terminal
block. Antenna is via a two-way
ELSEMA