DATAGRABBER Rapid RH L6 Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Регистраторы данных DATAGRABBER Rapid RH L6. DATAGRABBER Rapid RH L6 20 страниц.

Acclimation Time

The amount of time elapsed (in days) before the DataGrabber

will automatically capture (grab) a measurement and store

it in the L6 Smart Sensor's memory as the acclimated time

measurement of both RH and temperature. For instance,

setting an acclimation time of one day and then starting, the

DataGrabber will wait 24 hours and "grab" a measurement for

storage in the L6 Smart Sensor's memory. In most cases, it is

highly recommended to use one day as the acclimation time,

given that 24 hours is the minimum equilibration time specified

by the ASTM F2170 standard for getting official, documentable

RH readings.

NOTE

: Your DataGrabber device is "reusable" and not limited

to use with only one L6 sensor. To ensure that your device

properly utilizes the settings you configured, including the

acclimation time, be aware of the following when transferring

a DataGrabber device to another L6 sensor:

• For the DataGrabber, it takes up to one minute to turn

off after removal from an L6 sensor. If inserted into a

new sensor within that minute, the DataGrabber will

not detect the move until the next reading is taken.

• For the DataGrabber with Bluetooth, the process of

turning off the device after removal occurs much

quicker (about 5 seconds).

Log Interval

In addition to the reading captured (grabbed) when the

Acclimation Time has elapsed (see above), an L6 sensor, through

the DataGrabber with Bluetooth, will begin to capture readings

at a certain interval, defined as the Log (data logging) Interval.

This data logging of RH and temperature readings begins as

soon as the DataGrabber with Bluetooth is inserted into the

sensor, and a new set of readings is logged every time the Log

Interval is met. The default and minimum Log Interval is 1 hour.

Log Duration

A calculation of the total number of days that periodic time

and date-stamped readings will be taken based on the set log

interval and the L6 Smart Sensor's maximum memory storage

of 512 data points. Once this limit is reached, the first stored

reading will be overwritten.

WAGNER METERS