Elsner KNX Suntracer pro Установка и регулировка - Страница 5

Просмотреть онлайн или скачать pdf Установка и регулировка для Погодная станция Elsner KNX Suntracer pro. Elsner KNX Suntracer pro 16 страниц.

Safety and operating instructions

Installation, testing, operational start-up and troubleshooting should

only be performed by an authorised electrician.

CAUTION!

Live voltage!

There are unprotected live components inside the device.

• Inspect the device for damage before installation. Only put undamaged

devices into operation.

• Comply with the locally applicable directives, regulations and provisions for

electrical installation.

• Immediately take the device or system out of service and secure it against

unintentional switch-on if risk-free operation is no longer guaranteed.

Use the device exclusively for building automation and observe the operating instruc-

tions. Improper use, modifications to the device or failure to observe the operating in-

structions will invalidate any warranty or guarantee claims.

Operate the device only as a fixed-site installation, i.e. only in assembled condition and

after conclusion of all installation and operational start-up tasks, and only in the sur-

roundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may occur

after publication of these operating instructions.

For information on disposal, scope of delivery and technical data,

please refer to the installation instructions.

The Weather Station Suntracer RS485 pro measures temperature, wind speed,

wind direction, brightness air humidity and air pressure. It recognises precipitation and

receives the GPS signal for time and location. In addition, using location coordinates

and the time, it calculates the exact position of the sun (azimuth and elevation).

The weather station sends the currently recorded weather data, date and time once

every second. This data can be analyzed by an end device such as SPS, PC or MC. The

Suntracer RS485 pro has 2 connections for data output (A/B) and 2 for power supply

(24 V DC).

Functions:

•

Brightness measurement (current light strength). Measurement with 5

separate sensors, output of the current highest value (one maximum value)

•

GPS receiver, outputting the current time and location coordinates. The

Weather Station Suntracer RS485 pro also computes the position of the

sun (azimuth and elevation)

Weather Station Suntracer RS485 pro • Version: 20.09.2021 • Errors excepted. Subject to technical changes.

Safety and operating instructions