Cayken SCY-2550 Инструкция по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Сверло Cayken SCY-2550. Cayken SCY-2550 19 страниц.

In order to improve the drilling efficiency, some models with three shift gear.

There are high, medium and low-grade, high speed file (H file) for small bits and soft

materials; medium file (M file) for medium bit and hard materials; low profile (L profile)

forDrill and hard materials.

Shift when the machine stops or will stop.

Shift in place. If the spindle does not rotate or there is some noise after starting up, the gear

may not shift in place. Turn off the machine immediately, and then shift the gear to proper

place, rotate the spindle back and forth (easy to shift) at the same time till shift in place.

Do not shift when the machine is full-speed operated, over load or stuck.

is for low speed,

speed. Low speed to high speed, turn the knob clockwise, otherwise,anti-clockwise.

OIL BATH ADVANTAGE

Oil immersed type diamond drilling machine is a kind of drill for the reinforced concrete,

brick, stone, ceramic and refractory materials, It is Suitable for equipment installation, inst-

allation of water and electricity, tunnels and other construction, installation. Oil immersed

type diamond drilling machine gear oil has a very good pressure, when gear meshing fric-

tion surface temperature is high enough, It can react chemically with the gear surface, form

metal film strength strong critical shear, preventing gear surface wearing.

The friction losses, greatly improving the service life of the gear. The bearing capacity of

gear oil is high, is conducive to the tooth surface protection. At the high temperature it can

guarantee the reliable lubrication of the gear. Viscosity temperature performance is good

with the variation of working temperature, it ensures a sufficient liquidity at low temperat-

ure, ensure the liquid oil to the tooth surface and bearing friction loss, prevent,Injury. In the

high temperature viscosity does not decrease too much, can form a lubricating oil sufficie-

ntly thick enough.

is for high speed and,

is for medium speed. The drawing is for low