Cayken SCY-2550 Инструкция по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Сверло Cayken SCY-2550. Cayken SCY-2550 19 страниц.

Note: when using electric tools, to avoid the risk of electric shock or fire, please

follow the rules for safe operation.

Please read carefully before operating the machine, keep this manual in a safe place.

1. Keep working place cleanb.An untidy working area will increase the risk of accidents.

2. Take ambient conditions into account.Do not expose power tools to rain.Do not use

power tools near gas source.

3. Protect yourself against electric shock.Avoid physical contact with earthed parts,e.g.

Pipes,heaters,ovens and fridges.

4. Keep children well away.Do not let unauthorized persons touch the cool or cable and

keep them well away from your working area.

5. Keep your power tool safely.Tools not in use should be kept in dry,locked locations and

away from children.

6. Do not overload your power tools.They will work better and more safely in the given

performance range.

7. Wear suitable working clothing.Do not wear loose clothing or jewelry,otherwise you

may be caught by moving parts.When working in the open rubber gloves and non-slip

shoes are recommended.Cover long hair with a hair net.

8. Connect a dust extraction facility to power tool if this is possible and satisfy yourself

that it is working properly.

9. Do not use the cable for any other purpose.Do not carry the tool by the cable and do

not use it to pull the plug from the socket.

10. Do not bend too far over.Avoid an abnormal body position.Make sure you are

standing safely and always keep you balance.

11. Take good care of you power tools.Keep them sharp and clean so that they work

better and more safely.Follow the maintenance instructions and information when

changing a tool.Check the cable regularly and have it renewed by a qualified expert if

it is damaged.Check the extension cable regularly and replace it if it is damaged.Keep

the handle dry and free of oil and grease.

12. Remove the mains plug from the power supply when not in use,before servicing and

when changing the tool.

13. Do not allow any tool spanner to remain on the tool.Before switching on,make sure

that spanners have been removed.

14. Avoid unintended startup.Do not carry any power tool which is connected to the

eletricicty while your finger is at the switch.Ensure that the switch is off before plug in .