Dusol DS36W Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Солнечная панель Dusol DS36W. Dusol DS36W 11 страниц.

DUSOL Solar Photovoltaic module

MADE IN DUBAI

Once the PV module has been shipped to the installation site, all of the parts should be

unpacked properly with care.

Do not stand or step on the PV module, this is prohibited and there is a risk of damage the

module and cause injury for you.

Only PV modules with the same cell size should be connected in series.

During all transportation situations, please make sure no huge shock for the vehicle or the

modules, as this may damage the module or lead the cell to be crack.

During all transportation situation, never let the module fall down from the vehicle, house or

hands. This will break the cells of the module.

Do not clean the glass with chemicals.

Do not disconnect any of the module when it is under load.

3. Installation

Always wear protective head gear, insulating gloves and safety shoes (with rubber soles).

Keep the PV module packed in the carton or on the pallet until installation.

Do not touch the PV module unnecessarily during installation. The glass surface and the

frame may be hot. There is a risk of burns and electric shock.

Do not work in rain, snow or windy conditions.

Due to the risk of electrical shock, do not perform any work if the terminals of the

PV modules are wet.

Use insulated tools and do not use wet tools.

When installing PV modules, do not drop any objects (e.g., PV modules or tools).

Make sure flammable gasses are not generated or present near the installation site.

Insert interconnect connectors fully and correctly. Check all connections.

The interconnect cable should be securely fastened to the module frame, Cable support

should be done in a way to avoid the connector from scratching or impacting the back sheet

of the module.

Do not touch the terminal box and the end of the interconnect cables (connectors) with bare

hands during installation or under sunlight, regardless of whether the PV module is connected

to or disconnect from the system.

Do not expose the PV module to excessive loads on the surface of the PV module or twist the

frame.