Dusol DS60 Series Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Солнечная панель Dusol DS60 Series. Dusol DS60 Series 11 страниц.

DUSOL Solar Photovoltaic module

MADE IN DUBAI

1. General Information

Thanks for choosing DUSOL Solar PV modules. In order to ensure the PV modules to be installed

correctly, please read the following operation instructions carefully before installing and using the

modules.

Please remember that the products would generate electricity and certain safety measures need to be

taken to avoid danger.

This User Manual refers to the installation, wiring, handling, maintenance and general administration

of our PV-modules. Please read this manual accurately and completely before configuration and

installation of the PV-module. All advices given in this document are to be handled by a qualified

person. Attention should also be paid to the live threatening risk, which may occur because of the

tension in conjunction with a grid-feeding PV-plant. In case of an improper installation of the module

there is a danger of fire risk.

In case of divergence towards this user manual DUSOL does not incur liability for personal damages

or property damages, which arise because of improper utilization, maintenance or incorrect assembly

of the photovoltaic module.

This document is applicable to the series of solar module as listed below:

DS36M (150=40-170, in increment of 5)

DS60M (250=250-280, in increment of 5)

DS72M (300=170-350, in increment of 5)

DS36W (150=40-170, in increment of 5)

DS60W (250=250-280, in increment of 5)

DS72W (300=300-350, in increment of 5)

Make sure the array of modules installed within the Maximum permitted system voltage and the

rating current and voltage of the sub-equipments such as regulators and inverters. The maximum

permitted system voltage (DC) of the modules is 1000V. This module has a Class C Fire Rating and

must be installed over a roof which is with appropriate fire resistance.

The modules are qualified for application class A, and modules qualified for safety through EN IEC

61730 within this application class are considered to meet the requirements of Safety Class II