Elsner KNX PS640-IP Установка и регулировка - Страница 18

Просмотреть онлайн или скачать pdf Установка и регулировка для Источник питания Elsner KNX PS640-IP. Elsner KNX PS640-IP 20 страниц. Power supply system with ethernet interface

Печатать страницу

Elsner KNX PS640-IP Установка и регулировка

Group telegrams (main groups 14 and 15)

Block: No group telegrams of main groups 14 and 15 are routed to KNX.

Route: All group telegrams of the main groups 14 and 15 are routed to KNX.

Group telegrams (main groups 16 to 31)

Block: No group telegrams of these main groups are routed to KNX.

Route: An additional page appears on which the routing of main groups 16 to 31 can be

disabled or enabled in pairs.

Physically addressed telegrams

Block: No physically addressed telegrams are routed to KNX.

Route: All physically addressed telegrams are routed to KNX.

Filter: The physical address is used to check whether the received physically addressed

telegram should be routed to KNX.

Broadcast telegrams

Block: No received broadcast telegrams are routed to KNX.

Route: All received broadcast telegrams are routed to KNX.

Resending of group telegrams

Disable: The received group telegram is not resent to KNX in case of a fault.

Enable: The received group telegram is resent up to three times in case of a fault.

Resending of physically addressed

telegrams

Disable: The received physically addressed telegram is not resent to KNX in case of a

fault.

Enable: The received physically addressed telegram is resent up to three times in case

of a fault.

Resending of broadcast telegrams

Disable: The received broadcast telegram is not resent to KNX in case of a fault.

Enable: The received broadcast telegram is resent up to three times in case of a fault.

block • route

block • route • filter

block • route