cayken tools 38DM Инструкция по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Сверло cayken tools 38DM. cayken tools 38DM 7 страниц.
Печатать страницу
Operation Manual
WARNING
To prevent electric shock or fire, please strictly abide by the procedures in the
operation manual.
The machine only for the authorized persons, please do not let other people to
operate. If any violation of the instructions operation and cause personal injury
or machine damage, our company disclaim all responsibility.
The machine can be only maintained by the people who has the certification.
THANKS TO THE BUYER
Thanks for buying the series of magentic drill machine of
the operation manual and pay attention to the safety precaution.
The right operation, will make you fully feel our products superior performance.
Please put this manual in a safe place for future reference.
ABOUT THIS MANUAL
The machine model of the description in this manual:
KCY: 28DM
38DM
55DM
Confirm the machine model according to the nameplate.
. Please read
Mini models of horizontal magnetic drill
DESCRIPTIONS OF PRODUCTS
Magnetic drill is a kind of electric tool for adhering and drilling on the horizontal level,side
face and top face,and widely used in the building,bridge building,and ship building industries
and so on.You can use the magnetic drill when you can not use drill press and electric hand
drill to drill huge steel workpieces or in field operation. It´s very convenient to use, flexible,
can reduce labor intensity, improve the machining precision and work efficiency.
CAUTIONS
1.Please read the manual carefully before use, to understand the magnetic base drill structure;
electromagnetic sucker, electric drill and transmission functions.
2.Before installing or remove the drill must confirm the motor switch is closed and unplug.
3.Four hours of uninterrupted operation of the machine will cause the machine to fire, four
hours of uninterrupted operation of the disk will lead to highTemperature. High temperature
may cause fire. Do not touch the disk when the disk is hot, touch the disk will cause serious
burns. NoStop using disk for more than four hours. When you do not use the machine, you
should turn off the switch and unplug the power switch.
4.And its operation must be put in the fuselage behind the cable, away from the drill bit
5.In the switching power supply, electric and magnetic switch must be in the off position
6.Drilling machine must be used when using engine coolant. The use of cooling liquid (soap)
according to the ratio of watered, absolutely can not direct use water cooling. Otherwise very
easy to damage, and the main internal rust on the drill bit can't get it out. No internal machine
water, otherwise it will burn the circuit board.
7.Always keep the disk surface clean. Always keep the surface of the processed parts clean. If
there is any foreign body in the middle of the disk and the processed parts, which will weaken
the magnetic force, will result in the operation of the machine in the process of shaking. Will
lead to accidents, keep all the surface clean and free of rust, small wood or other things.
8.The use of magnetic base drill, must wear a seat belt buckle.
9.No rough operation personnel, feed can not handle in order to work fast and pressed down
the machine feed, so lossy bit and machine
10.Non-magnetic materials can not drill with magnetic base, if the non-magnetic material
punching need to choose the magnetic base drill with sucker.
11.Cannot use at the same time, electric welding machine and magnetic base drill on the same
piece of steel plate, so that the operating from electric shock danger.
5
1
2