4IPNET WHG713 Руководство по быстрой установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Контроллер 4IPNET WHG713. 4IPNET WHG713 17 страниц. Secure wlan controller

System Overview

Front Panel

LCD Display: Allows network administrator to check important system settings such as network interface,

SZ configurations, etc. The navigation buttons from left to right are "ESC", "Up", "Down", and "Enter".

LED Indicators: There are two kinds of LED, Power and HDD (Hard Disk), to indicate the different

status of the system.

Restart: Press and hold the restart button for about 5 seconds and the system will restart.

Console: The system can be configured via a RJ-45 console port or a USB Type-C port. The

administrator can use a terminal emulation program such as Microsoft's Hyper Terminal to login to the

configuration console interface to change admin password or monitor system status, etc.

USB: Reserved for future use.

RJ45 Ethernet Ports: Two 10/100/1000 Base-T WAN ports (WAN1 / WAN2) are connected to the

external network, such as the ADSL Router from your ISP. The other six ports for the LAN connections

(LAN1 / LAN2 / LAN3 / LAN4 / LAN5 / LAN6).

SFP Ports: Two WAN SFP ports (WAN1 / WAN2) are connected to the external network such as the

ADSL Router from your ISP. The other two ports for the LAN connections (LAN1 / LAN2).

Rear Panel

Device Cooling Fan: Do not block the cooling fans. Leave enough open space for ventilation.

VGA Connector: For connection to a Monitor if needed.

10. USB: Reserved for future use.

11. Power Switch: For Powering the Device On/Off.

12. Power Supply Socket: Connecting the power cord to the built-in power supply.

WHG713

Secure WLAN Controller

②

Quick Installation Guide

ENGLISH