Dustbane Hurricane 700 XTT Краткое руководство - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство для Напольная машина Dustbane Hurricane 700 XTT. Dustbane Hurricane 700 XTT 2 страницы.

Печатать страницу

Clean the dirty

water tank.

DAILY MAINTENANCE

Clean the dirty

water tank.

Clean the dirty

Clean the dirty water tank.

Clean the dirty

water tank.

Check the detergent tank

fill filter is undamaged and

Check that the

clean.

detergent outlet filter

is clean.

Check the detergent tank

Make sure the detergent tank fill filter

Check that the

fill filter is undamaged and

squeegee is clean

is undamaged and clean.

clean.

and the blades are not

Open the clip (Ref. 1).

Check the detergent tank

worn.

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

fill filter is undamaged and

Remove the blade.

fill filter is undamaged and

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the

clean.

screws on the body of the squeegee.

clean.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing

REPLACING THE SQUEEGEE BLADES

devices inwards.

Open the clip (Ref. 1).

Close the hook again.

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Replace the squeegee on its support, following the instructions described previously.

Remove the blade.

Ref. 1

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the

Open the clip (Ref. 1).

screws on the body of the squeegee.

Open the clip (Ref. 1).

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Attaching:

Remove the blade.

devices inwards.

Remove the blade.

insert the brushes under the head, making sure they rest against the aligners. Hold the button down to lower the head until the brushes are engaged.

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the

Close the hook again.

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the

screws on the body of the squeegee.

Replace the squeegee on its support, following the instructions described previously.

screws on the body of the squeegee.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing

devices inwards.

Close the hook again.

Open the clip (Ref. 1).

Close the hook again.

Replace the squeegee on its support, following the instructions described previously.

Attaching:

Remove the two blade retainers (Ref. 2) by pushing them

insert the brushes under the head, making sure they rest against the aligners. Hold the button down to lower the head until the brushes are engaged.

outwards then extracting them.

Releasing:

lift the head using the lift button, then press the release button.

Attaching:

Remove the blade.

Attaching:

insert the brushes under the head, making sure they rest against the aligners. Hold the button down to lower the head until the brushes are engaged.

Reuse the same blade by reversing the edge in contact with the

floor until all four edges are worn out, or replace with a new blade,

fitting it onto the screws on the body of the squeegee.

PLDC03891.indd

Releasing:

Reposition the two blade pressing devices by centering the wider

lift the head using the lift button, then press the release button.

part of the slots on the squeegee body fastening pins, then push

the blade pressing devices inwards.

Releasing:

lift the head using the lift button, then press the release button.

Close the hook again.

lift the head using the lift button, then press the release button.

Replace the squeegee on its support, following the instructions

PLDC03891.indd

described previously.

PLDC03891.indd

Dustbane Products Ltd., 25 Pickering Pl., Ottawa, ON K1G 5P4

PLDC03891.indd

Check the suction filter is

undamaged and clean.

Clean the dirty

water tank.

Clean the dirty

water tank.

Make sure suction filter is undamaged

Check that the

and clean.

detergent outlet filter

is clean.

Check that the

brushes are

clean. Replace if

necessary.

REPLACING THE SQUEEGEE BLADES

BATTERY CHARGER

STAND ALONE

Check the detergent tank

fill filter is undamaged and

clean.

Check that the

ATTACHING/REMOVING THE BRUSHES

Check the detergent tank

Make sure the brushes are clean and not

brushes are

Check the detergent tank

fill filter is undamaged and

clean. Replace if

worn. Replace if necessary.

fill filter is undamaged and

clean.

Check that the

necessary.

clean.

brushes are

clean. Replace if

REPLACING THE SQUEEGEE BLADES

necessary.

REPLACING THE SQUEEGEE BLADES

Open the clip (Ref. 1).

REPLACING THE SQUEEGEE BLADES

Ref. 2

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Remove the blade.

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the

screws on the body of the squeegee.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing

devices inwards.

Close the hook again.

ATTACHING/REMOVING THE BRUSHES

Replace the squeegee on its support, following the instructions described previously.

ATTACHING/REMOVING THE BRUSHES

Attaching:

insert the brushes under the head, making sure they rest against the aligners. Hold the button down to lower the head until the brushes are engaged.

Releasing:

lift the head using the lift button, then press the release button.

PLDC03891.indd

DAILY MAINTENANCE

Check the suction filter is

undamaged and clean.

Check the suction filter is

undamaged and clean.

Check that the

squeegee is clean

and the blades are not

worn.

Check that the

squeegee is clean

brushes are

and the blades are not

clean. Replace if

necessary.

Check that the

squeegee is clean

brushes are

REPLACING THE SQUEEGEE BLADES

brushes are

and the blades are not

clean. Replace if

Check that the

clean. Replace if

worn.

necessary.

squeegee is clean

necessary.

and the blades are not

REPLACING THE SQUEEGEE BLADES

worn.

ATTACHING/RELEASING THE DRIVE

REPLACING THE SQUEEGEE BLADES

Ref. 1

ATTACHING/REMOVING THE BRUSHES

Attaching:

Insert the drive under the head, making sure it rests against

the aligners. Hold the button down to lower the head (Ref. 1)

until the drive is engaged.

Releasing:

Lift the head using the lift button (Ref. 1), then press the release

button (Ref. 2).

•

Tel: 1-800-387-8226 Fax: 1-800-363-5309 www.dustbane.ca

Check that the

detergent outlet filter

is clean.

BATTERY CHARGER

STAND ALONE

Check the suction filter is

undamaged and clean.

Make sure detergent outlet filter is clean.

BATTERY CHARGER

STAND ALONE

BATTERY CHARGER

STAND ALONE

BATTERY CHARGER

STAND ALONE

Check that the

worn.

Check that the

squeegee is clean

Make sure the squeegee is clean and the

squeegee is clean

and the blades are not

blades are not worn.

and the blades are not

worn.

Check that the

detergent outlet filter

Check that the

is clean.

Check that the

detergent outlet filter

is clean.

BATTERY CHARGER

STAND ALONE

Check that the

worn.

Ref. 2

BATTER

STAND A