Datalogic PowerScan D8330 Краткое справочное руководство - Страница 2

Просмотреть онлайн или скачать pdf Краткое справочное руководство для Считыватель штрих-кодов Datalogic PowerScan D8330. Datalogic PowerScan D8330 2 страницы.

Печатать страницу

DEFAULT VALUES

USB-KBD DEFAULT SETTINGS

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,

USB keyboard speed normal.

: code identifier disabled, no field adjustment, code length not

DATA FORMAT

transmitted, no header, terminator = ENTER, character replacement disabled.

RS-232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx

timeout 5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled,

serial trigger lock disabled.

: code identifier disabled, no field adjustment, code length not

DATA FORMAT

transmitted, no header, terminator = CR-LF, character replacement disabled.

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock

unchanged, inter-character and inter-code delays disabled, control character

emulation = ctrl+shift+key.

: code identifier disabled, no field adjustment, code length not

DATA FORMAT

transmitted, no header, terminator = ENTER, character replacement disable.

PEN DEFAULT SETTINGS

interpret operating mode, conversion to code 39 disabled, output level normal,

idle level normal, minimum output pulse 600 µs, overflow medium, inter-block

delay disabled.

CODE SELECTION

Enabled codes

•

EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

•

Interleaved 2/5

check digit control and transmission, variable length code; 4-99 characters

•

Standard Code 39

no check digit control, variable length code; 1-99 characters

•

Code 128

variable length code; 1-99 characters

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,

Code 11, Code 16K, Code 49, GS1 DataBar™ Codes

TECHNICAL FEATURES

PowerScan

D8330/ D8330 AR

PowerScan®

Electrical Features

PowerScan® D8330

D8330 AR

4 to 30 VDC

Power Supply

Max. Consumption:

0.076 mm (3 mils)

0.25 mm (10 mils)

@ 4V

420 mA

500 mA

@5V

310 mA

370 mA

@30V

62 mA

70 mA

Sleep mode

4 mA

Scan Rat

35 ± 5 scans/sec

Good Read LED (green)

Reading Indicators

Good Read Spot (green), Beeper

Optical Features

Reading Field

110 cm (43.3 in)

1090 cm (429.13 in)

(Typical performance at 20ºC /

@ 55 mils

@ 100 mils reflective

68ºF on high quality barcodes)

Max. Resolution

0.076 mm (3 mils)

0.178 (7,5 mils)

PCS (Datalogic Test Chart)

15%

25%

Laser Features

Power (max)

0.9 mW

1.3 mW

Scan Angle

42°

13.5° ± 0.7

Laser Safety Class

Class 2 EN 60825-1/CDRH

Environmental Features

Working Temperature

-30 °C to + 50 °C / -22° to +122 °F

-30 °C to + 70 °C / -22° to +158 °F

Storage Temperature

Humidity

90% non condensing

Drop Resistance

IEC 68-2-32 Test ED 2 m

Protection Class

IP65

Mechanical Features

Weight (without cable)

about 295 g (10.4 oz)

Cable Length

2 m (6 ft 6 in)

RESTORE DEFAULT

Ì$+$*oÎ

To change the defaults refer to the PowerScan® D8330/M8330 Reference

Manual, or to the Datalogic Aladdin™ Configuration program, both downloadable

from the website.

INTERFACE SELECTION

Select one of the interface codes according to your application.

USB INTERFACE SELECTION

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

USB-IBM Table top

Ì$+UA00$-(Î

USB KBD-APPLE

Ì$+UA05$-FÎ

* When configuring USB-COM, the relevant files and drivers must be installed

from the USB Device Installation software, which can be downloaded from the

web site http://www.scanning.datalogic.com.

PEN EMULATION INTERFACE SELECTION

PEN

Ì$+CP6$-BÎ

RS-232 INTERFACE SELECTION

RS-232 Standard

Ì$+CP0$-$Î

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

WEDGE INTERFACE SELECTION

Wedge IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

PC Notebook

Ì$+CP505$-ÈÎ

PC Notebook - ALT mode

Ì$+CP508$-2Î

IBM AT - ALT mode

Ì$+CP507$-+Î

Interface for IBM XT and IBM Terminals 3151, 347X and 348X can be selected

from the PowerScan D8330/M8300 Reference Manual available online at

http://www.scanning.datalogic.com.

KEYBOARD NATIONALITY

USB-KBD and Wedge users should select one of the following wedge keyboard

nationality codes according to the keyboard.

Belge

Ì$+FJ7$-8Î

Deutsch

Ì$+FJ3$-$Î

English

Ì$+FJ4$-)Î

Español

Ì$+FJ6$-3Î

Français

Ì$+FJ2$-ÊÎ

Italiano

Ì$+FJ1$-ÅÎ

Svenskt

Ì$+FJ5$-.Î

USA (Default)

Ì$+FJ0$-|Î

The following Keyboard Nationality selections are only valid for IBM AT compatible

PCs:

Japanese

Ì$+FJ8$-=Î

Russian (Latin)

Ì$+FJ9$-BÎ

Russian (Cyrillic)

Ì$+FJA$-jÎ

Hungarian

Ì$+FJB$-oÎ

Slovenian, Croatian, Serbian (Latin)

Ì$+FJC$-tÎ

Romanian

Ì$+FJD$-yÎ

Czech Republic

Ì$+FJE$-~Î

USING POWERSCAN® D8330/D8330 AR READERS

PowerScan® D8330 readers automatically scan barcodes at a distance. Simply

aim and pull the trigger. Code scanning is performed along the scan line emitted

from the reading window. This line must cross the entire code. The best reading

angles are indicated in the figure below.

AIMING SYSTEM

PowerScan® D8330 and PowerScan® D8330 AR provides an aiming system. If

enabled, a partial trigger press produces a red spot, which should be aimed over

the code center to get the best reading performance (see figure above,

completely pressing the trigger the scan line appears to start code scanning

After setting up the reader, you can enable or disable the aiming system by

reading the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

DATA FORMAT TERMINATORS

For your convenience, some common Terminators are given below. For other

Header/Terminator selections, Data Format and Advanced Data Format

parameters, see the PowerScan® D8330/M8330 Reference Manual.

CR-LF

Ì$+EA120D0A$-ÃÎ

Enter

Ì$+EA1183$-0Î

Tab

Ì$+EA1184$-8Î

None

Ì$+EA10$-dÎ

OPERATING TEST

Read the TEST code below.

Code 128

). By