CB ELECTRONICS XPand Руководство пользователя - Страница 17

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер CB ELECTRONICS XPand. CB ELECTRONICS XPand 18 страниц. 8 channel monitor expansion

Печатать страницу

Firmware Updates

The USB Port is also used to update the XPAND firmware. Updates are posted on the XPAND

product page. See the XPAND Reference for more information:

http://www.colinbroad.com/cbsoft/amon/xpand.html

The Mute LED is used to indicate the Programming mode as follows

Mute LED Flashing approximately once per second – Ready to program

•

Mute LED Flashing approximately twice per second – Programming

•

Mute LED Flashing approximately once per two seconds – Finished programming

•

Recovery Mode

If for any reason there is a problem when reprogramming (eg. Power Failure) a recovery

mode is provided.

To enter recovery mode, disconnect the power for at least 5 seconds, then reconnect with

the Mute key depressed. You will need to reselect the USB port used by MidiUpd.

The Mute LED will flash at approximately 1 second intervals to indicate that the device is

ready to program.

XPAND 8 Channel Monitor Expansion

Version 3.0