CB Svendsen TeleSwitch M2 Инструкции по установке и эксплуатации

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Переключатель CB Svendsen TeleSwitch M2. CB Svendsen TeleSwitch M2 4 страницы.

Печатать страницу

TeleSwitch

TeleSwitch is a perfect remote controlled switching and reporting unit for

residence, summer house, office and workshop use.

Telephone,

mobile

Telephone

(Worldwide)

network

Telephone

Net

230V



Telephone,

land line

(Worldwide

)

With TeleSwitch you can switch electrical appliance on or off via the telephone, or

receive a message in the case of for example a break-in, unauthorized access,

machinery stop, etc.

Technical specification:



Connection to the public telephone network



2 channels, which can either be programmed to be outputs (control) or inputs (message

or alarm)



4-digit security code



Timer functions from 1 to 99 hours per output.



Pulse activation of outputs (to be specified when ordering)



Alarm via telephone. TeleSwitch rings to a pre-programmed telephone number.



Number of rings before responding. (1 to 9 rings before responding)



Operated by normal touch-tone or mobile telephone.



Remembers the last change or setting in the case of a power cut.



Connected to a 230V mains power supply (a 12V supply can be specified to order).



Grounded to provide additional protection against lightning.



The outputs can be loaded to 230/250V 10A



Manual operation available on the front panel, with channel status indication.

Summer house, residence, office,

workshop etc.

"Door Surveillance"

Heat on /off

Installation and user instructions

General description

TeleSwitch is a remote control unit operating via the telephone network, with 2 function

channels.

TeleSwitch is connected by means of an existing telephone/fax to the telephone network.

Each of the function channels can be programmed as an output

an electric heater, outdoor lighting, etc.)

or as an input

low temperature in a summer house, generate an alarm in the case of a burglary, etc.)

Outputs:

If a function channel is programmed

as an output, you can via telephone

decide whether the output

(contact in the

is to be closed or opened.

TeleSwitch)

TeleSwitch has a built-in timer function (1 to 99 hours), which makes it possible to

decide how long an output is to remain closed. The timer function can however be switched off.

Inputs:

If a function channel is programmed

as an input, you can via telephone

receive a message whether a connected

message/alarm contact is closed or

open.

(The contact can for example be a non-touch

door contact to report burglary, a water level monitor in a groundwater well, etc.)

If the input is activated

(message/alarm switch connection)

telephone number and provide a message or alarm tone.

It is also possible to call TeleSwitch and check whether an input is activated.

TeleSwitch is connected to the public telephone network via a normal telephone jack

and can be controlled by a normal touch-tone phone or a mobile telephone.

To ensure that no unauthorized person can ring to a TeleSwitch and interfere with its control of

the inputs and outputs,

It is equipped with a four-digit security code that you can select yourself.

You can choose from two types of TeleSwitch.

Table model M1

and wall-mounted

module M2

M1 is easy to install and can be brought into use without the help of a tradesman.

M2 requires installation by an authorized electrician as the TeleSwitch has to installed

connected to a high voltage distribution panel.

Both types need to be connected to a 230V mains power source.

The output contacts can have a maximum loading of 230 V 16A or 250 V 10A.

(e.g. to switch on or off

(e.g. to report

H e a t e r

T e le S w it c h

D o o r c o n t a c t

T e le S w it c h

TeleSwitch can call a predetermined