CB2 Finn Lounger Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Внутренняя отделка CB2 Finn Lounger. CB2 Finn Lounger 3 страницы.

Печатать страницу

finn

LOUNGER

Thank you for purchasing the Finn Lounger. This page

lists all the contents included in the box. Please take

the time to identify the hardware as well as the

individual components to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

components

2 - side frames

(1 left, 1 right)

1 - back

frame

1 - slat roll

Made in China - r08

1 - support

leg

1 - front

1 - center

crossbar

rail

1 - matress

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

hardware

2 - threaded

2 - allen

8 - screws

bolts

1 - support

4 - hex

2 - hex

leg bolt

bolts

nuts

Missing hardware?

Please call 800.606.6387 for replacements.

5 - pads

tools required

allen wrench

( We recommend the use of hand tools instead of power tools )

left and right

side frames

A. Insert 1 barrel screw and 1 threaded bolt into

left and right side frames as shown. Secure, but

do not over tighten, the barrel screws with a

phillips head screwdriver.

B. Using a screwdriver, remove set screws from

each barrel nut and set aside. Insert barrel nuts

into the back frame as shown. Align the hole on

the side of each barrel nut with the hole on the

end of the back frame.

2 - barrel

nuts

screws

2 - connectors

2 - caps

hex wrench

phillips head screwdriver

(not included)

back

frame

Page 1 of 3