CB2 GLOSS Инструкции по сборке - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по сборке для Внутренняя отделка CB2 GLOSS. CB2 GLOSS 4 страницы. Tall dresser
Также для CB2 GLOSS: Инструкции по сборке (4 страниц)

Печатать страницу
gloss
TALL DRESSER
NOTE: Do not
over tighten bolts
left side
panel
NOTE: Make sure grooves
of left and right side panels
are facing each other during
assembly as shown
Insert 4 wood dowels into middle panel as
shown. Fit dowels of middle panel into
corresponding holes of left and right side panels.
Secure each side panel with 2 bolts, 2 spring
washers and 2 flat washers. Secure, but do not
over tighten, bolts with a phillips head
1
screwdriver.
With assistance of another adult, position unit
upright. Fit back panel into corresponding
3
grooves of side panels as shown.
Made in Vietnam - r05
right side
panel
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bottom
panel
Insert 4 wood dowels into bottom panel as
shown. Fit dowels of bottom panel into
corresponding holes of side panels, and secure
with 4 bolts, 4 spring washers and 4 flat
2
washers.
A
B
A. Insert 2 wood dowels into left and right side
panels as shown.
B. Fit dowels of side panels into corresponding
holes of top panel. Secure each side panel with
4
2 bolts, 2 spring washers and 2 flat washers.
top panel
Page 2 of 4