CB2 Grid Инструкции по сборке - Страница 5
Просмотреть онлайн или скачать pdf Инструкции по сборке для Внутренняя отделка CB2 Grid. CB2 Grid 5 страниц. Media console
Также для CB2 Grid: Руководство (4 страниц)
Печатать страницуgrid
MEDIA CONSOLE
mounting
bracket
plastic
C
anchor
wall
strap
small
A
screw
wall mounting assembly
NOTE:
If you are unsure about your wall type or what mounting method you should
use, consult a qualified professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware
be installed. For safe mounting, it is essential to use wall anchors appropriate to
your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 2 mounting brackets to top of unit using 1 small screw per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2"
below each mounting brackets mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall
that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the mounting brackets to the wall by inserting 1 large screw through
each mounting bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with the
wall bracket.
F) Lace one end of each wall strap through corresponding brackets, and into the
other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
Made in China - r07
D
large
screw
mounting
bracket
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
WALL
Page 5 of 5