Datalogic Magellan 9300i Краткое справочное руководство - Страница 11
Просмотреть онлайн или скачать pdf Краткое справочное руководство для Сканер Datalogic Magellan 9300i. Datalogic Magellan 9300i 16 страниц. Scanner and scanner-scale with imaging technology
Также для Datalogic Magellan 9300i: Руководство по настройке (14 страниц), Руководство по настройке (14 страниц)
Печатать страницу
LED and Beeper Indications
The scanner's beeper sounds and its lamps and indicator LEDs illuminate to indicate
various functions or errors. The tables in this section list some of these indications. Ref-
erence the PRG for a more complete listing.
Scanner
INDICATION
LED
Pre-operating
OFF
Mode
Power-up Beep
N/A
Good Read Beep Bright flash
200ms ON
ROM Failure
200 ms OFF
Scanner Active
On steady
Mode
and dim
Continuous
blink 100ms
Scanner Disabled
ON / 900ms
OFF
10ms ON
Sleep Mode
1990ms OFF
Chirp Indications
N/A
(see comment)
INDICATION
Scale LED
Scale at Zero
On steady
Scale Error
Coded
Reporting
sequence
Quick Reference Guide
Behaviors listed in the tables are programmable, and may or may
not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming bar code
labels.
NOTE
BEEPER
Count
Frequency
Volume
OFF
Unique WAV file sound.
1
Current
Current
1
Error
Highest
N/A
N/A
N/A
6
Highest
Current
BEEPER
N/A
N/A
LED and Beeper Indications
Duration
Default sound is a synthesized chord end-
ing with two light bells.
Frequency, volume and duration are con-
Current
figurable.
200ms ON
Indicates either Boot or Program ROM fail-
200ms
ure.
OFF
The scanner is ready for operation. Scan-
ning is immediately available.
The Host has disabled scanning.
The scanner has been inactive for a period
and is in a power-saving mode.
A "Chirp" is used to indicate the following:
-Reading labels while in limited scanning
mode.
20ms ON
-Label rejection during label programming.
20ms OFF
-A label with no data.
-Labels rejected through the auxiliary port
when in Scanner
Diagnostics Mode.
The scale is at rest and reads zero weight.
The scale is ready to weigh.
When the scanner is in Scale Diagnostics
Mode, the Remote Scale Display and the
Scale LED indicator can communicate spe-
cific scale failures. See the PRG for more
details.
COMMENT
COMMENT
7