CB2 Veer Руководство по сборке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по сборке для Внутренняя отделка CB2 Veer. CB2 Veer 6 страниц. Wardrobe

veer

WARDROBE

optional wall mounting assembly

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a

qualified professional or your local hardware store.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe

mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete,

etc.). Mount to wood studs whenever possible.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below each

mounting bracket on the back of the unit.

C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller

in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the

wall.

D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting

bracket and into the wall anchor in the wall.

E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.

F) Lace one end of each wall strap through corresponding brackets, and into the other end of the strap.

G) Pull the straps tightly until secure.

Wall mounting assembly is now complete.

Made in Vietnam - r04

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

WALL

Page 6 of 6