Datalogic SG-LP SERIES Руководство
Просмотреть онлайн или скачать pdf Руководство для Аксессуары Datalogic SG-LP SERIES. Datalogic SG-LP SERIES 4 страницы.
Печатать страницу
OVERALL DIMENSIONS
Shows all the overall mechanical dimensions of any possible configuration.
AVAILABLE MODELS
MODEL
SG-LP
SG-LP Laser pointer
DECLARATION OF CONFORMITY
DATALOGIC AUTOMATION declare under our sole responsibility that these products are conform to the 2004/108/CE,
Directive and successive amendments
WARRANTY
DATALOGIC AUTOMATION warrants its products to be free from defects.
DATALOGIC AUTOMATION will repair or replace, free of charge, any product found to be defective during the warranty
period of 36 months from the manufacturing date.
This warranty does not cover damage or liability deriving from the improper application of DATASENSOR products.
DATALOGIC AUTOMATION Via S. Vitalino 13
40012 Calderara di Reno - Bologna - Italy
Tel: +39 051 3147011
Fax: +39 051 3147453
www.automation.datalogic.com
e-mail: [email protected]
DATALOGIC AUTOMATION cares for the environment: 100% recycled paper.
DATALOGIC AUTOMATION reserves the right to make modifications and improvements without prior notification.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
856001500 Rev.00
Fig.11
DESCRIPTION
ORDER N°
95ASE5590
Operations Office Via Lavino 265
40050 Monte S.Pietro - Bologna – Italy
Tel: +39 051 6765611
Fax: +39 051 6759324
© Copyright Datalogic 2009
SG-LP SERIES
GENERAL INFORMATION
Thanks to its completely new housing and fixing system SG-LP laser pointer can be installed in all safety
light curtains profiles of SE, SG2, SG4 and SG Body series. Thanks to a specially designed CAM fixing
equipment the laser pointer can be inserted into one of the two lateral grooves either from the top or from
the side, depending on which kind of fixing brackets have been used to mount the safety light curtain
(standard "L" or TOP-BOTTOM Rotating ones).
One top and one lateral fixing brackets, together with two tightening knobs, allow to adjust SG-LP laser
pointer's position in both transversal and longitudinal directions and to have it constantly centred respect
light curtain's optical axis, independently from housing width.
HIGLIGHTS
To be used to help the mechanical alignment of TX and RX unit of safety light curtain;
Suitable for all SE, SG2, SG4 and SG Body profiles;
Installation performed through one of two lateral grooves of the safety light curtain housing;
Insertion into the groove either from the top or from the side;
Transversal and longitudinal adjustment, thanks to one top and one lateral fixing brackets,
together with two tightening knobs
TYPICAL APPLICATIONS
SG-LP laser pointer is advised to be used to ease TX and RX mechanical alignment process in the following
installation conditions:
Mutli-beam body/access protection safety light curtain whose operating distance is more than
50m;
Mutli-beam body/access protection safety light curtain installed with deviating mirrors to perform
perimetric protections;
Finger or hand protection safety light curtains installed with deviating mirrors to protect different
sides of a machine.
PACKAGE CONTENTS
The package contains the following items:
a) Laser pointer (1 pcs)
b) Mounting cams ensemble (1 pcs)
c) Transversal adjustment bracket (1 pcs)
d) Vertical mounting bracket (1 pcs)
e) User manual (1 pcs)
Laser pointer
Nuts and bolts
4x8 DIN464 Knurled screw (4 pcs)
1