CBE DS-520AN Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование CBE DS-520AN. CBE DS-520AN 13 страниц.
![CBE DS-520AN Руководство по эксплуатации](/uploads/products/server2/1792361/1792361.png)
GB
CONTROL PANEL - "PC-200T 4t IH" mains' control, battery test, tank test, temperature test and clock function.
u
12V DISTRIBUTION BOX "DS-520AN - main relais, battery parallel relais (12V - 70A), fridge relais, pump relais, car
u
battery recharging device, amperemeter, protection fuses.
BATTERY CHARGER - buffer-system battery charger.
u
ELECTRONIC TANK PROBE - it measures the content of the water tanks, visualization in "%".
u
TANK PROBE WITH SCREWS "SS/P" - signalization of full waste water tank
u
LEISURE BATTERY "B2" - it gives power to all the users
u
CAR BATTERY "B1"
u
ENGINE ALTERNATOR - it recharges in parallel both the car and the leisure battery
u
230V CUT-OUT board - it powers and protects all the 230V users
u
"50A"CAR (B1) AND LEISURE (B2) BATTERY PROTECTION FUSES
u
IMPORTANT
Maintenance interventions on the electric plant shall be carried out by specialized personnel.
w
Before carrying out maintenances works disconnect the battery and the power supply line.
w
BATTERIES
Read with care the maintenance and use instructions provided by the manufacturer.
w
The acid kept in the batteries is poisoning and corrosive. Avoid any contact with skin and eyes.
w
If the battery is completely discharged it needs recharging for almost 10 hours. If discharged for more
w
than 8 weeks it may be damaged.
Check periodically the level of the liquid of the battery (with acid); the GEL battery does not need any
w
maintenance but a countinuous recharging.
Check the correct tightening of the connection binding screw and brush off the oxyde.
w
If the leisure battery is removed, isolate the positive pole (in order to avoid short-circuits during an
w
accidental car engine starting).
In case of a longer stop the services battery has to be connected or recharged regularly.
w
BATTERY CHARGER
The battery charger must be installed in a dry and ventilated place.
w
This device shall be installed by specialized technicians only.
w
In the event of battery charger's misuse, the guarantee shall no longer be valid and the manufacturer
w
declines all responsibility for damages to people and things.
Do not carry out any maintenance when the battery charger is connected to the 230V power supply
w
net.
Do not cover air intakes and assure an appropriate ventilation.
w
Before disconnecting the battery charger from 230V power supply, turn the safety switch off.
w
TANK PROBES
Never let water in the tanks for long time, in order to avoid foulings, especially in the waste water tank.
w
230V CUT-OUT BOX
Before taking away the cover, check if the 230V socket is disconnected.
w
In order to avoid any damage to the box, check the correct tightening of the connections.
w
In order to cut power to the whole 230V system, please take care that the 230V main switch must be
w
on the "0" (OFF) position.
Connect and disconnect the external 230V net only when the main switch is off.
w
In case of automatic switch break, find the damage before giving power again to the electrical
w
system.
FUSES
Replace the fuses only after finding out the real cause of the damage only.
w
If the fuses are replaced observe the value of the amperage established.
w
MAIN PARTS OF THE ELECTRIC AL SYSTEM
"
ADVICE AND CHECKS
13