Datalogic Joya Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сенсорные терминалы Datalogic Joya. Datalogic Joya 2 страницы. Single slot dock locking
Печатать страницу
Remove the Joya Touch from the Single Slot Dock
Locking
The Joya Touch Single Slot Dock Locking can be unlocked using the unlock key provided with the cradle
or by software sending an unlock command from the inserted device (see the Joya Touch user's
manual or the SDK documentation).
To locally unlock the dock and remove the Joya Touch:
1. Insert the unlock key into the opening and gently press it all the way down:
2. Remove the Joya Touch while keeping the unlock key pressed:
The Joya Touch gets warm during charging. This is normal and does not mean a malfunction.
NOTE
Powering the Dock
To prevent the risk of short-circuiting, first plug the power cord into the power connector on the back
of the dock, then connect the power cord to the power supply.
Use only the Datalogic power supply 91ACC0048 to power the Joya Touch Single Slot Dock
Locking.
The Single Slot Dock Locking cannot be daisy-chained to a Joya Touch 3-Slot Cradle.
CAUTION
Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside
the slot of the dock (see the picture below).
CAUTION
Technical Specifications
Electrical Features
Consumption 12V 5A
Indicators
Battery Charger LED (bi-color)
Environmental Features
Operating
-10° to 45ºC
*
Temperature
Storage
-20 to 70°C
Temperature
**
Humidity
95% non condensing for temperatures < 40°C
Mechanical Features
Dock: 124x119.6x114.5mm/ 4.9x4.7x4.5in
Dimensions
Dock with Joya Touch Handheld: 124x119.6x175.7mm/ 4.9x4.7x6.9in
(L x W x H)
Dock with Joya Touch Pistol Grip: 124x148.8x175.7mm/ 4.9x5.9x6.9in
Dock: 522g/ 18.4oz
Weight
Dock with Metal Plate: 634g/ 22.4oz
*
The Joya Touch should be charged at an ambient temperature between 0 and 35º C to achieve the maximum
charging rate. Never charge the main device in a closed space where excessive heat can build up. Close to the
limits of the working temperature, some display and/or battery performance degradation may occur.
**
Multiple rapid humidity and/or temperature variations may cause condensing.
LED Indicators
LED
Power On (Green LED)
Solid green for 3 seconds
Dock bootstrap: cradle application started.
Dock standby (if the standby LED is enabled): the dock is
Short blink every few seconds
powered and ready, no device inserted. You can enable/disable
the standby LED feature from DL Cradle Manager.
Dock standby (if the standby LED is disabled): the dock is
Off
powered and ready, no device inserted. You can enable/disable
the standby LED feature from DL Cradle Manager.
Battery Charger LED (Bicolor Green/Red LED)
Off
Device not charging or not inserted (see above).
Solid red
Device is charging.
Solid green
Device charging completed.
Maintenance LED (Red LED)
Cradle not calibrated. Solution: perform an "auto calibration"
Blink red, 1 quick pulse
from DL Cradle Manager. Ensure that the lever is free to move.
Lever wrong position. It is open but it should be closed or vice
Blink red, 2 quick pulses
versa. Solution: restore the lever position (e.g.remove the
mechanical key from the slot).
FOD (Foreign Object Detection). It's a WLC error related to
metallic parts between transmitter and receiver coils. The power
Blink red, 3 quick pulses
transfer is suspended. Solution: remove the device from the
cradle, then remove the metallic part causing the problem.
EOC (end of charge) timeout error. The WLC EOC signal has been
kept enabled by the terminal for too much time. Typically, it is
Blink red, 4 quick pulses
caused by a bug in the terminal firmware. The power transfer is
disabled.
WLC generic error. WLC system seems unstable and unable to
setup a stable power transfer, within a reasonable time. The
Blink red, 5 quick pulses
power transfer is suspended. Solution: try to extract the device
from the cradle and to re-insert it again.
Blink red, 6 quick pulses
Device charging error.
Solid red
Firmware upgrade.
Radio Technologies and Frequency Bands
The Joya Touch Single Slot Dock Locking incorporates the following radio technologies and supports
the corresponding frequencies, as specified below:
Radio Technology
NFC (Near Field Communication)
13.56MHz
Wireless Charging (Transmitter)
130kHz
Status
Frequency Bands