ADE HWZ-6 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE HWZ-6. ADE HWZ-6 20 страниц. Electronic counting scale
8.3.2 Weighing a sample to determine the unit weight
To determine the average weight of the individual units to be counted, it is necessary to place a
known number of units on the scale and then enter the number of units to be weighed.
The scale then divides the total weight by the number of units and the average unit weight is
displayed. Set the scale to zero by pressing the
used, place the container on the scale and tare as previously described.
Place a known number of units on the scale. If the "Weight" display is stable, enter the number of
individual units with the numeric keys and press the
The number of units is shown in the "Count" window and the calculated average weight is shown
in the "Unit weight" window.
If more units are placed on the scale, the weight and the number of units will increase.
If a number is placed on the scale that is lower than the reference unit weight, the scale recalcu-
lates the unit weight and increases it. To lock the unit weight and avoid automatic recalculation,
press
.
If the scale is not stable, the calculation will not be performed. If the weight is below zero, the
"Count" window shows a negative number of units.
8.3.3 Entering a known unit weight
If the unit weight is already known, this value can be entered using the keypad.
Enter the value of the unit weight with the numeric keys and press the
window shows the value as entered.
Place the units to be counted on the scale. The weight and the number based on the unit weight
are displayed. When weighing in kg, the unit weight is displayed in grammes. When weighing in
lb, the unit weight is displayed in pounds.
8.4
Counting more units
After the unit weight has been determined or entered, it is possible to use the scale for unit count-
ing. The scale can be tared to clear the container weight as explained in the previous section.
After taring the scale, place the units to be counted on the weighing platform. The "Count" window
shows the number of units that was calculated using the total weight and the unit weight.
It is possible to increase the accuracy of the unit weight at any time during unit counting: Enter
the displayed number of units and press the
equals the amount on the scale before pressing the key. The unit weight can be adjusted if it is
based on a larger number of samples. This will allow greater accuracy when a larger sample size
is to be counted.
8
key, if necessary. If a container is to be
key.
key. You must be sure that the number shown
HWZ-190214-Rev006-UM-en
key. The "Unit weight"