Datamax PrintPAD CN70 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Принтер Datamax PrintPAD CN70. Datamax PrintPAD CN70 14 страниц.
Также для Datamax PrintPAD CN70: Краткое руководство по эксплуатации (2 страниц)

Печатать страницу

Using Bluetooth

Note: The following information applies to printers with Bluetooth capabilities.

Radio printers are configured with default factory settings. To determine your printer's radio configuration, print a

self-test. (For more information, see

specifically for use in your environment.

For proper system operation, set the following parameters on your printer and host computer:

Bluetooth Parameters

Device Name



Authentication



Bondable



Discoverable



Connectable



Encryption



Contact your network administrator to verify the proper radio settings for your environment.

PrintPAD CN70 LEDs and Indicators

Power LEDs

Power LED

Battery Status LED

Red (solid):

The battery has less than 5% power.

Orange (solid):

The battery has less than 25% power.

Green (solid):

The battery is near, or at, full capacity.

Red to orange flash - fast

Orange flash - slow

Orange flash - fast

Orange, red, or green flash - fast

Printing a Self-Test on page 5

Description

• If A/C power is not plugged in, the

printer will soon turn off.

• If A/C power is plugged in, the LED

flashes and charging is in progress.

• If A/C power is not plugged in, indicates

the battery charge is low.

• If A/C power is plugged in, the LED

flashes and charging is in progress.

• If A/C power is not plugged in, the

battery is well charged.

• If A/C power is plugged in, the LED is

solid and charging is complete.

Battery voltage is too high.

Charge has timed out.

Internal code error.

When the AC adapter is plugged into the

printer's power port, the battery status

LED flashes orange, red, or green

(depending on the battery status LED color

that is initially displayed) to indicate the AC

adapter is plugged in.

PrintPAD CN70 USER'S GUIDE

.) If you have multiple printers, configure them

Radio LED

Action

• Charge the battery.

• None. Wait for the charge LED to turn

green.

• Charge the battery.

• None. Wait for the charge LED to turn

green.

None.

Replace battery.

Restart battery charge (battery may be

bad).

Remove the battery, then re-connect A/C

power.

None.