Datamax H-Class Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Изготовитель этикеток Datamax H-Class. Datamax H-Class 10 страниц. Cutter option
Также для Datamax H-Class: Руководство (8 страниц), Краткое руководство по эксплуатации (12 страниц), Руководство (14 страниц), Руководство (12 страниц)

Maintaining the Heavy Duty Peel & Present Assembly

To ensure trouble free operation, the Heavy Duty Peel and Present Assembly should be cleaned after

every 100,000 inches (254,000 cm) of media use. This interval depends on the label adhesive, where

"gummy" adhesives may require more frequent cleaning. (To easily track label usage, go to SYSTEM

SETTINGS  MEDIA COUNTERS in the printer's menu system.)

Clean the assembly as follows:

1. Turn 'Off' the Power Switch and unplug the power cord from the AC Receptacle. Raise the Access

Cover and remove the media from the printer.

2. Remove the Peel & Present Assembly from the printer.

3. Using compressed air or a soft brush, clean the Sensors on the assembly.



Note:

For cleaning heavy deposits, isopropyl alcohol can be used – provided it is carefully

applied using a cotton swab, and then allowed to dry before reconnecting the option to

the printer.

Sensors