Datamax M-Class Mark II Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Изготовитель этикеток Datamax M-Class Mark II. Datamax M-Class Mark II 10 страниц. Rfid option
Также для Datamax M-Class Mark II: Руководство (6 страниц), Руководство (8 страниц), Краткое руководство по эксплуатации (4 страниц), Краткое руководство по эксплуатации (8 страниц), Краткое руководство по эксплуатации (6 страниц), Краткое руководство по эксплуатации (8 страниц)

Печатать страницу
Datamax M-Class Mark II Руководство
 Remove Upper Roller Shaft and associated
Rollers.
 Clean all surfaces of the Rollers and the Upper
Roller Shaft. Isopropyl Alcohol can be used,
for heavy or stubborn deposits WD-40 or an
adhesive remover can be used. Be sure all the
ridges on the rollers are free of debris.
 Re-assemble the Upper Roller Shaft, Rollers,
and C-Clip into the Peel Mechanism Assembly.
Lower Rollers:
 Remove the Peel Mechanism from the printer.
Press in on the Latch and allow the Front Cover
to swing open.
 Push in on the Tab as shown, repeat for the
other side and then remove the entire Lower
Roller Assembly.
 Remove Lower Roller Shaft and associated
Rollers. Note the order of the Rollers as they
are removed, they must be re-installed in the
same order.
 Clean all surfaces of the Rollers and the Lower
Roller Shaft. Isopropyl Alcohol can be used,
for heavy or stubborn deposits WD-40 or an
adhesive remover can be used. Be sure all the
ridges on the rollers are free of debris.
 Re-assemble the Lower Roller Shaft and
Rollers. Reinstall the assembly into the Peel
Mechanism Assembly
Upper Roller
Shaft
Lower Roller
Assembly
Lower Roller
Shaft
8
Rollers
Push in on Tab