Datapath VSN870 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Datapath VSN870. Datapath VSN870 20 страниц. Video wall controller

Use of the SBC's onboard graphics adaptor

Onboard Graphics Adaptor used as Control Screen

The VSN870 is shipped with the BIOS configured to boot off the onboard graphics device. This output can

then be used as the control screen for a typical wall configuration.

To set the system to boot on the onboard graphics device ("Internal Graphics Device" - IGD), enter setup

from the boot screen by pressing <DEL> as prompted.

In the BIOS setup utility select:

Chipset>North Bridge Configuration>Initiate Graphic Adapter - [IGD]

Chipset>North Bridge Configuration>PEG Port Configuration>PCI Express Port - [Auto]

Fig.5

CAUTION: If the SBC BIOS is setup for IGD as above, then you must not insert an Image4 or other

VGA graphics card in the first (x8 lane) PCIe slot (Fig.7).

Please note that when the VSN870 is configured with a Vision800X expansion chassis, the first slot of the

host machine is taken up by the H-Link card, so the above prohibition refers to the first slot of the

expansion chassis.

Onboard Graphics Adaptor Disabled

If you do not require a control screen, then you should disable the integrated graphics as described below.

Connect a monitor to the onboard graphics device output and enter setup from the boot screen by

pressing <DEL> as prompted.

In the BIOS setup utility select: