Datapath X4 Руководство по настройке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по настройке для Контроллер Datapath X4. Datapath X4 14 страниц. Stand alone display wall controller
Также для Datapath X4: Руководство (2 страниц)

Печатать страницу
Datapath X4 Руководство по настройке
Calculations for the Windmill Configuration (Fig.3)
The first task is to determine the source canvas width and height in mm:
Using a tape measure, measure the distance from I to K but only the active screen area, i.e. do not include
the outer bezels.
In this example I to K (Width) = 2500mm
To determine the source canvas height, measure the distance from B to C but only the active screen area,
i.e. do not include the outer bezels.
In this example B to C (Height) = 1500mm

Region 1

To calculate the width, calculate the following:
The distance between A to B (448mm) divided by the distance between I to K (2500mm) multiplied
by the source width (1920).
(448 ÷ 2500) x 1920 = 344
Input the number 344 as the Width for Region 1.
For the height, calculate the following:
The distance between A to G (730mm) divided by the distance between B to C (1500mm) multiplied
by the source height (1080).
(730÷1500) x 1080 = 526
Input the number 526 as the Height for Region 1.
As the top of the monitor captures the top of the source canvas enter zero in the Top box for Region 1.
To calculate the Left number for Region 1:
Measure the distance from I to G (inside bezels).
In this example I to G =695mm
Calculate the following:
The distance between I to G (695mm) divided by the distance between I to K (2500mm) multiplied
by the source width (1920).
(695 ÷ 2500) x 1920 = 533
Enter 533 into the Left box for Region 1.
10