Dataprobe IP-2815 Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Переключатель Dataprobe IP-2815. Dataprobe IP-2815 13 страниц. Dual input web controlled power switches
Печатать страницуiP-28xx
Serial Port pinout:
Pin No
Description
1
Data Carrier Detect
2
Receive Data
3
Transmit Data
4
Data Terminal Ready
5
Signal Ground
6
Data Set Ready
7
Request to Send
8
Clear to Send
9
Ring Indicator
Modem Connection * for models with internal modem *
For units with internal modems, an D9 to RJ11 adaptor is used. This is included with the unit.
Connection Diagrams
iP-2815
iP-2815-M
A/C Power Connections
The iP-2820 provides two linecords for connection to two 20 Amp 115VAC services (NEMA 5-20P). The total maximum
current load for each group of four outlets (1-4 and 5-8) cannot exceed 16 Amps.
The iP-2815 provides two linecords for connection to two 15 Amp 115VAC service (NEAM 5-15P). The total maximum current
load for each group of four outlets (1-4 and 5-8) cannot exceed 12 Amps.
The iP-2810 is for international applications and can be set for use on 115V or 230VAC. The iP-2810 provides two IEC 320
style universal inlet for connecting a detachable power cord. Two standard IEC to NEMA 5-15 cord sets are supplied with the
unit for use on 15 Amp 115VAC service. The total maximum current load for each group of four outlets (1-4 and 5-8) cannot
exceed 12 Amps at 115VAC or 10 Amps when used at 230VAC.
Note: Linecord marked 1-4 is required for the remote control operation of the unit. If Linecord 1 is disconnected all LEDs and
communications will not function and all outlets powered by linecord 5-8 will turn On.
Crossover
Cable
D9-RJ Adpater
# 1940149
External
Modem
Straight
Cable
OR
Direct Connect
to Terminal
Emulation
Dial-up
Page 4
Dial-up
Dial-up to
computers running
Dial-up Networking
Telnet and/or Web