Dataprobe iPIO-8 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Контроллер Dataprobe iPIO-8. Dataprobe iPIO-8 2 страницы. Ethernet i/o monitor and control
Также для Dataprobe iPIO-8: Краткое руководство по эксплуатации (2 страниц), Руководство (15 страниц)
Печатать страницуiPIO-8 Quick Start Guide
Power supply
The iPIO-8 is provided with a wall mounted power supply, item
1930075. This power supply is provided with four plug styles to
accommodate most locations. The plug for North America is pre
installed.
Network
Connect the network to the iPIO-8 with the Cat 5 cable, provided,
or suitable replacement. The Network connector on the iPIO-8
has two LED indicators. The orange LINK LED indicates a
successful connection to the network. The Green Activity (Act)
LED blinks to display network activity.
During power up sequence, Act LED will be solid on until boot process is complete. After boot, Act LED
blinking indicates network activity. Boot up takes about 20 seconds.
WEB Page Access
The web pages provide status information on the
inputs and outputs of the iPIO-8, as well as provide
configuration for the unit. Open a browser to the
default or current IP address of the unit. Enter the
default username and password:
Factory Defaults:
Version 1.2
IP Address
Version 1.1
IP Address
User Credentials
User Type
Administrator
General User
Recover IP Address and Set Factory Defaults
Dataprobe provides a Setup Utility that
1) Discovers iPIO-8 units on the local network, and displays the current IP Address
2) Allows setting the IP Address
3) Resets to Factory Defaults
Download the Setup Utility from Dataprobe website at
http://dataprobe.com/ipio-web-relay-control.html?Resources
Ref: ipio8_1.20_qs
192.168.1.254
192.168.0.254
Default Username / Password
admin / admin
user / user
Power Supply 1930075 Included
iPIO-8 Login Page
Access
View, Control and setup
View and Control
ver: 2011-08-25
Page 2