Dux Platinum 3000 Series Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Dux Platinum 3000 Series. Dux Platinum 3000 Series 20 страниц. Pressure feed

Печатать страницу

Fluid Needle Replacement

As previously mentioned, the Platinum Pressure

Feed spray gun utilizes a universal fluid needle.

There is no need to change the needle when

changing fluid tips unless special self-cleaning

needles have been purchased. However, nee-

dles may wear over time, especially with very

abrasive coatings, and may need to be replaced

periodically.

NOTE: DUX offers optional self-cleaning fluid

needles for various coatings/applications.

These needles are specially designed to clean

material out of the fluid tip between triggering.

Due to the nature of these needles, they can

only be used with tips of the same size. Con-

tact DUX Customer Service for more informa-

tion regarding this option

The DUX Platinum Pressure Feed is provided with a brass trigger pin. This pin is manufactured from a

relatively soft metal to reduce wear on the Stainless Steel trigger.

Because it is a wearable part, it may be necessary to replace the trigger pin when heavy use of the gun

has resulted in deformation. When this occurs, it is best to replace the entire trigger pis-ton assembly,

since an excessively worn trigger pin may have caused unseen wear on other portions of the air valve.

For customer service call 888.389.2732

Figure 16: Exploded View of Fluid Needle Assembly

PLATINUM PRESSURE FEED

Removal of the fluid needle

1. Ensure the spray gun is depressurized

2. Unscrew the fluid control knob and com-

pletely remove the needle assembly.

3. Remove the needle cap (# 5 in Figure 16).

4. Remove the spring and needle from the fluid

control knob.

Replacement of the fluid needle

1.Install the new needle and spring into the fluid

control knob.

2.Carefully replace the needle cap making

certain the needle, needle holder, and spring are

properly seated.

3.Lubricate the needle as indicated in figure 2

and reinsert the needle assembly into the spray

gun body.

1.Fluid Control Knob

2. Needle Holder

3.Fluid Needle

4.Needle Spring

5. Needle Cap

Page 16