Datasensor OF-44XF-20 Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кабели и разъемы Datasensor OF-44XF-20. Datasensor OF-44XF-20 3 страницы.

Печатать страницу
OF40
INSTRUCTION MANUAL
The fibre-optic OF40 is an accessory for
DATASENSOR LD series U.V. readers.
INSTALLATION
To install the OF40 proceed as follows:
• Disconnect the power supply of the
sensor.
• Replace the sensor lens with the fibre
adapter.
• Insert the fibre-optic into the adapter; the
first insertion resistance is due to the O-
ring seal; please continue to insert the
fibre until it reaches the mechanical
stop.
• Fix the fibre-optic to the adapter using
the setscrew wrench included in the
package.
The fibre is made of a liquid solution
enclosed in a plastic covering; for a correct
functioning of the fibre the bend radius must
be greater than 60mm; don't twist or stretch
the fibre.
Abutment
Adapter
5.3
TECHNICAL DATA
Operating temperature (fibre end fittings):
Operating temperature (fibre body):
Storage temperature:
Covering material:
End fittings material:
Bend radius:
Protection class:
Weight:
WARRANTY
DATASENSOR S.p.A. warrants its products to be free from defects.
DATASENSOR S.p.A. will repair or replace, free of charge, any product found to be defective during the warranty period of 36 months from the manufacturing date.
This warranty does not cover damage or liability deriving from the improper application of DATASENSOR products.
DATASENSOR S.p.A. cares for the environment: 100% recycled paper.
DATASENSOR S.p.A. reserves the right to make modifications and improvements without prior notification.
DIMENSIONS
O-ring
Setscrew
24
27
44
66
mm inch
-5 ... +60 °C
-5 ... +35 °C
-5 ... +60 °C
spot
Plastic
Brass Chrome plated
Minimum 60 mm
IP64
110 g.
DATASENSOR S.p.A. Via Lavino 265
40050 Monte S. Pietro - Bologna - Italy
Tel: +39 051 6765611
Fax: +39 051 6759324
http://www.datasensor.com
826140002 Rev.B
Bend radius
20
44
L
READING DIAGRAM
LD SERIES WITH OPTIC FIBRE OF-40
15
0.5
7.5
0.5
0
10
20
7.5
0.5
15
TARGET 1
TARGET 2
TARGET 3
LENGTH = 0.5 m
inch
1
distance
30
mm