ADE M20610 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE M20610. ADE M20610 8 страниц. Electronic column scale

HOLD function

By using the HOLD function the identified weight might be stored and is shown on the display even if

you stepped already off the scale. The advantage is to take care of the patient first and then take note

of the weight.

Press HOLD/BMI key while scale is under load.

The display shows a blinking arrow symbol next to the HOLD symbol.

Once the scale is loaded with more than 3 kg the blinking stops.

The weight displayed will now also show after unloading of the platform.

To deactivate the Hold function press again HOLD/BMI key.

Before cleaning make sure the scale has been disconnected from the socket.

For cleaning just use a damp cloth or common disinfection fluids.

Do not use any aggressive cleaning fluids.

Make sure no water or cleaning fluids is penetrating the scale.

Your ADE scale is equipped with a mains adapter and rechargeable batteries.

If the display shows the symbol `Low´ the power pack needs to be recharged by using the adapter.

Do NOT use the scale

•

If the mains adapter shows visible damages.

•

if the mains adapter is not working properly any more

•

After long storage in humid places

Please contact your dealer or service partner in those cases.

Storage and Transport

Please keep all original parts and pieces for an eventual sending back of the scale

in order to avoid any possible damage during transport which automatically leads to non warranty.

Disconnect all cables before transport and avoid unnecessary damages.

Warranty – Liability

ADE will repair or replace this product within a period of 2 years from date of delivery applying to

defects occurred due to poor material or workmanship (presentation of invoice is necessary). All

moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty

does not include natural wear, damages caused by incorrect or negligent handling, overuse or

unsuitable or improper storage. The cost of transport will be borne by the customer should the

equipment be located anywhere other then the customer's premises. In the event of transport

damage, claims under warranty can be accepted subject to using the complete original packaging and

the equipment secured the way it was packed and secured originally. All the packaging should

therefore be retained.

050100-Rev001-M20610