DV8 OFFROAD FDJK-07 Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары DV8 OFFROAD FDJK-07. DV8 OFFROAD FDJK-07 16 страниц. Slim fenders 07-18 jeep wrangler jk

Печатать страницу

INSTALLATION

MANUAL

STEP 21 |

To use the nutsert tool,

slider the M6 washer and spacer onto the

provided M6x50 bolt.

Then install a nutsert onto the exposed

threads by hand.

STEP 22 |

Slide the nutsert tool with

the nutsert into the mounting hole.

Ensure the flange of the nutsert is flat

against the vehicle prior to tightening.

STEP 23 |

Use a 12mm wrench to hold

the spacer while tightening with a 10mm

socket. Tighten slowly until the nutsert is

set properly. Do not over tighten.

Nutsert should be "crushed" against the

inside of the fender so that it is tight and

secure.

When finished remove the nutsert tool

using a 10mm socket and repeat as

needed.

Note: Be sure to hold the spacer tight so it does

not move and scratch paint.

NEED HELP?

855-680-9595