DV8 OFFROAD SPEC Series Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10 страниц. Rear bumper for 2018+ jeep jl wrangler
Также для DV8 OFFROAD SPEC Series: Руководство по установке изделия (10 страниц), Руководство по установке (12 страниц), Руководство по установке (9 страниц)

INSTALLATION

MANUAL

STEP 10 |

Install the gaskets onto

the fender.

The gaskets are notched to line up with

the mounting holes on each fender.

Install the fender flare

onto the vehicle using the provided

M6x20 hardware with a 4mm allen bit.

Secure the front mounting support using

the supplied M6x25 hardware with a 4mm

allen bit and 10mm wrench.

During install, check the gasket on the

fenders and tuck away any extra gasket

using a trim clip tool.

Note: Assistance is recommended to prevent

injury and damage to the product or vehicle.

STEP 11 |

Route and secure the

wiring to your preference and install the

new turn signal into the factory connector.

Note: It is important that the wiring is

secure and tucked away. Do not let it hand

down into the fender.

Repeat process for the other side.

NEED HELP?

855-680-9595