Cooey B61T Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор артериального давления Cooey B61T. Cooey B61T 19 страниц.

5- With 99 groups memories;

6- Support the average measurement results;

7- Biult-in chargeable lithium ion battery;

8- Cuff and main unit are integrated as one part;

9- With charging indicator;

10- With Blood Pressure result Indicator

Note: Arm circumference should be measured with a measuring tape in the middle of the relaxed upper arm.

Do not force cuff connection into the open wound.

4. Using your Monitor for the First Time

----------------------------------------------------------------------------------------------------------------------------

4.1 Battery Power checking

Battery Power Checking

The battery is built-in chargeable Lithium ion battery

Press the "Power ON/OFF " button, if the "Battery Indicator" become "Red", it means the battery power is

low, and the unit need to be re-charged, the power supply should be AC 5/1A. Please recharge it and when

the "Battery Indicator" become "Green", it means the battery is fully recharged. It can be used normally. If

battery is not fully re-charged, the indicator flashes in Red.

Assessment indicator

The indicator is set around the stop/start button. After measurement, the indicator will turn into different

colors according to the assessment. Blue means normal; Yellow means mild high blood pressure; Red

means high blood pressure.

4.2 System Settings

After the battery is fully recharged, some functions can be set before use this monitor:

Start/Stop

Press the Start/Stop button one time. The indicator around the button turns blue, the bluetooth is waiting for

connection. Long press the button again can start the messurement directlly, or connect device with smart

phone, it can be remote controlled by App which is installed beforehand in the smart phone. There will be a

voice "Bluetooth is connected" if the device connects with smart phone by Bluetooth successfully.

Setting the Volume

When the device is turned off, press and hold the Vol+ / Vol- button, you will hear the voice guide of Volume

up / Volume down to set your favorite voice volume.

Assessment of the memory record

When the device is turned off, press and hold the Vol+ and Vol- simultaneously, it will broadcast the average

value. Then press Vol+ / Vol- button once, it will seek for the next/previous assessment record.

When the device is turned on, press and hold the Vol+ and Vol- simultaneously, it will clear all the

assessment records.

d. Turn off the voice notice and background music.

Press the Vol+ or Vol- button during the very beginning when reading the notice, the voice notice and

background music will be turned off and start measurement immediately (It will save time if you don't want to

Version Number: 1.0