Aussie Pumps Eco Clean Super Indy Инструкции по эксплуатации и техническому обслуживанию - Страница 9

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Ультразвуковой очиститель ювелирных изделий Aussie Pumps Eco Clean Super Indy. Aussie Pumps Eco Clean Super Indy 20 страниц. High pressure washer

Печатать страницу

FILLING THE DETERGENT

TANK

Use a detergent that suits your

cleaning application diluted to

the correct concentration.

Fill the detergent tank with the

diluted product (fig. 3).

Ask your dealer for the cata-

logue of the detergents that

can be used depending on

the type of washing job to be

done and the type of surface

to be treated.

After using a detergent, the

detergent intake circuit must

be flushed out with clean

water.

FILLING THE WATER SOF-

TENER TANK.

(if

available)

Fill the tank with water sof-

tener solution.

Use only products recom-

mended by the manufac-

turer and/or dealer. Follow

the instructions given on the

packaging meticulously. (Do

not disperse water softener in

the environment).

COMMAND AND CONTROL DEVICES

Before connecting the machine to the water supply and

to the power mains, it is essential to know the function of the

cleaner's command and control devices.

FIG. 2

FIG. 3

FIG. 4

Aussie Eco-Clean Super Indy Operating & Maintenance Manual - 2020

WATER CIRCUIT CONNEC-

TION

Connect the feed hose to

the mains (fig. 5A) and to

the hosetail on the cleaner

(fig. 5B).

Check that the pressure and

quantity of the water supplied

by the mains are sufficient for

the cleaner to work properly: 2

to 8 BAR (29 to 116 PSI).

Maximum temperature of fee-

ding water 50°C (122°F).

Connect the high pressure

hose to the cleaner (fig. 5C)

and to the lance (fig. 6).

IMPORTANT.

The cleaner must operate

with clean water. Dirty or

sandy water, corrosive che-

micals and solvents can

cause severe damage to

the cleaner.

Failure to respect the above

absolves the manufacturer

of all liability and repre-

sents negligent use of the

product.

ELECTRICAL CONNECTION

Connection of the cleaner to the mains must be carried out

be skilled technicians able to ensure that all regulations in

force are complied with

and legislation.

Ensure that the mains voltage available is the same as the vol-

tage at which the cleaner is supposed to work; this is indicated

on the identification plate.

The electric cable must be protected from accidental cru-

shing.

Do not use the machine if the supply cable is damaged.

The use of any electric appliance requires the respect of

some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

• Do not use the appliance bare-footed or with unsuitable

clothing.

• Do not pull the supply cable or the appliance itself in order

to disconnect the plug from the electric supply.

(For water cleaners rated at less than 3 kW fitted with

As for the protection against electric shock, the H.P.cleaner

belongs to CLASS I.

Failure to observe the above warning frees the manu-

facturer from all responsibility and constitutes negligent

use of the product.

use in respect of current standards

FIG. 5

FIG. 6

plug).

| 9