Datavideo TP-300 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Профессиональные аксессуары для видео Datavideo TP-300. Datavideo TP-300 18 страниц. Tablet

Печатать страницу

PROMPTER KIT FOR TABLET

Decide if camera riser blocks, item K, are required

depending on the position of the camera lens.

If using 1 block, use the short hex screws, item M,

through one block but leave the centre hole empty. Turn

the block over so that screws project downwards and sit

in the long slot on top of the prompter frame, item A.

Fit the camera riser screw, item O, with washer from

below the top slot, through the riser blocks centre hole

and into the camera base, so the camera is secure with

prompter block(s) and frame.

Decide if the Snood / Hood support wire, item J, needs

to be fitted at this point.

There are three sets of holes in the Glass Frame for this

wire.

TP-300