Frigidaire CFTR1826PS5 Руководство по эксплуатации и уходу - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Холодильник Frigidaire CFTR1826PS5. Frigidaire CFTR1826PS5 13 страниц.

Печатать страницу
H H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!i H!iii
cov.Foq
?cove .or
Screw
Screw
Top
Hinge
Bottom
crew
Hinge
Screw
_/8" Fixed
Wrench
The direction in which your refrigerator
doors open (door swing) can be reversed, from left
to right or right to left, by moving the door hinges from one side to the other. Reversing the
Before you begin, turn the refrigerator
temperature
control to "0" and remove the electrical
power cord from the wall outlet. Remove any food from door shelves.
Top
_
_
Hinge-_._
TopHnge
_
i
,I i
II
III
Door S top,,_ jDoo,
_ll
III
Scre__,_
Stop
\
_
I
III
_
I
_Washer
i
Door
Stopj_
"/I
Door
10.
Screw_
Stop
I -lWaShe_ II.
[
XO_t[-.,_
Pin
_
_3.
_"_To_
14.
Grille
15,
Door removal and reversal instructions:
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft
lead pencil. This makes reJnstallatJon easier. Remove top hinge
and lift door off center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save
for reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator
door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim
to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator,
remove inside screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8" socket
wrench.
8. Install bottom hinge on opposite side with the two screws
removed from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move
hinge pin to other hole in hinge and tighten with adjustable
wrench.
Reverse door handles (see instruction
on next page).
Move freezer and refrigerator
door stops to opposite side.
Before starting screws, use an awJ to puncture the foam.
Position refrigerator door onto bottom hinge pin and screw
center hinge pin through center hinge into top of door. Close
refrigerator door to help align hinge hole.
Tighten center hinge pin with adjustable wrench.
Remove cabinet and hinge hole plugs and move to opposite side.
Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of door while tightening
screws
to install top hinge.
17. Flip toe grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature
control to center position.
Adjust setting as necessary.