ADE SA 913 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE SA 913. ADE SA 913 8 страниц.

1. Place the scale on a table. Switch-on the scale by using the tap-on-function. For this, tap with

your hand shortly on the centre of the scale. At first, the display will indicate all symbols

and

then the signal

uO.O

kg" while simultaneously the music automatically starts to play.

2. To select your personal location (01-12) press the SET-button and select your personal

location by using the'" or ... button. Press the SET-button to save the reading.

3. After you've selected your personal location (e.g. 03) the symbol for gender starts to flash.

To select the requested gender (, female or • male) press the'" or ... button. After the

selection of your gender press the SET-button to save the reading.

4. After you've selected your gender (e.g. female) the symbol for body height starts to flash

(default HOCm). To enter your height press the'" or ... button. After the selection for your

height press the SET-button to save the reading.

5. After you've selected your body height the symbol for age starts to flash (default Age 30). To

enter your age press the ... or ... button. After the selection of your age press the SET-

button to save the reading.

6. After you selected your age the symbol for fitness level starts to flash (default Al). To enter

your fitness level (Al-A5), press the ... or ... button. After the selection of your fitness level,

press the SET+button to save the reading.

A few seconds after completion of the input, the scale automatically power-off. The music plays

along until time shutdown of the entered time or until manual switch-off.

To enter personal data of further persons or to change already stored data please repeat the steps

listed below.

6. Body Analysis

An analysis is only possible in bare feet. Your personal data must

entered first (please see page

3-4).

1. Switch-on the scale by using the tap-on-function. FOf this, tap with your foot shortly on the

centre of the scale. The display indicates all symbols then "0.0 kg" and simultaneously the

music starts to play. To select your personal location (01-12), press the'" or ... button.

2. At the first time measurement, the display indicates the under this location stored data and a

few seconds later .0.0" kg. When you once used the scale, the display indicates at first the

under this location stored data and afterwards the readings of your last measurement. This

function allows you to follow the changes between your measurements.

3. As soon as "0.0 kg" appears on the display, the scale is prepared for the measurement.

4. Carefully in bare feet step on the stainless steel strips on the right and left side of the weighing

platform and remain stationary while the measurement is now taking place.

5. After the reading is stable, the weight indication flashes twice and your weight will

indicated. Shortly atter, while the analysis is taking place the signal

"1'

starts to move. After

completion of the measurement, the display indicates for 10 seconds your measured values as

follows: weight, body fat, body water, and 8MI (body mass index). After this, the scale will

automatically switch-off. The music plays along until time shutdown of the entered time or until

manual switch-off.