Cookology ANG705WH Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вентиляционная вытяжка Cookology ANG705WH. Cookology ANG705WH 18 страниц.

9. Put the installed chimneys on the cooker hood. Fix the inside chimney

bracket to the wall by using 2 (4mm x 40 mm) screws and wall plugs .

Pull out expansion pipe till it feeds through the hole on the wall.

Lift the inside chimney onto the outside chimney bracket, fix the inside

chimney to the outside chimney bracket by using 2 screws (4mm x 8mm).

After installation, make sure that the cooker hood is level to avoid grease

collection at one end.

10. Before usage, read all the instructions and make sure that the voltage

(V) and the frequency (Hz) indicated on the identification plate (found

inside the cooker hood) and all the data inside the appliance are exactly

the same as the voltage and frequency in your home. Then plug the power

lead into the power socket (unless you are hard-wiring in to the mains)

and start the cooker hood.

4.Notice of installation

1. Before installation, please ensure the area is clean to avoid suction

of the remaining bits of broken wood and dust.

2. It cannot share the same air ventilation tube with other appliance

such as gas tube, warmer tube, and hot wind tube.

√