Cookology TCH301 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Cookology TCH301. Cookology TCH301 14 страниц. 30cm ceramic hob black
Печатать страницу Warning: Before obtaining access to terminals, all supply circuits must be
disconnected.
WARNING: Use only hob guards designed by the manufacturer of the
cooking appliance or indicated by the manufacturer of the appliance in
the instructions for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause accidents.
WARNING: The appliance and its accessible parts become hot during
use.
Care should be taken to avoid touching heating elements.
Power cord will not be accessible after installation.
For Installation instructions, please go to the section marked Installation.
2. Installation
Installing the ceramic hob
The kitchen area should be dry and aired and equipped with efficient
ventilation. When installing the ceramic, easy access to all control
elements should be ensured.
This is a Y-type design built-in ceramic, which means that its back
wall and one side wall can be placed next to a high piece of furniture
or a wall .Coating or veneer used on fitted furniture must be applied
with a heat-resistant adhesive (100 ℃ ).This prevents surface
deformation or detachment the coating.
Hoods should be installed according to the manufacturer's
instructions.
Assembly of ceramic hob :
Make an opening with the dimensions given in the diagram for the
hob to be mounted on the worktop．
Check seal for perfect fit and overall cover. Lower the ceramic hob
into place and align correctly.
Using a standard screwdriver, tighten the tension clamps evenly
starting at the centre and moving diagonal, until the built-in rim is
tight on the worktop.
5