AUSTRALIAN MONITOR IMGC450 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микрофон AUSTRALIAN MONITOR IMGC450. AUSTRALIAN MONITOR IMGC450 4 страницы. Gooseneck microphone
Также для AUSTRALIAN MONITOR IMGC450: Руководство по установке и эксплуатации (8 страниц)
Печатать страницуINSTALLING SHOCK MOUNT & IMGC450 MICROPHONE
The shock mount is designed to be flush-mounted and provides isolation to reduce
room-rumble and mechanical noises from being amplified.
Installing the shock Mount
1
Choose a suitable flat surface to install the shock mount.
2
Using a hole saw cut a 51mm (2inch) diameter hole through
the mounting surface
3
Slide the shock mount into the freshly cut hole and mark the
location of the three screw holes using a marker or punch.
4
Using a 3.0mm drill pre-drill three pilot holes.
5
Insert the shock mount into the hole again and fasten down
the shock mount with the 3 screws provided.
Installing IMGC450 into the Shock Mount
1
To install the IMGC450 into the Shock Mount unscrew the
bottom plastic screw collar.
2
Slide the IMGC450 body into the Shock Mount.
3
Re-install the bottom plastic screw collar until snug.
Be careful not to cross thread or crack the plastic screw collar.
4
Insert a female 3-pin XLR connector into the microphone base.
5
Phantom power is required for the IMGC450 to operate.
To avoid possible loudspeaker damage ensure the PA system
is muted first before you enable phantom power.
PAGE 2
IMGC450 GOOSENECK MICROPHONE