4smarts Miami Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Автомобильные аксессуары 4smarts Miami. 4smarts Miami 10 страниц. Solar power-case, energy to go 2charge

Печатать страницу
I. Safety instructions
EN
- Protect the device from dirt, moisture and
overheating, and only use it in dry rooms.
- Do not open the device. Stop using the
device if it becomes damaged.
- The device should only be repaired by
a specialist.
- Never use force when plugging in the
device and the adapter (if used).
- Make sure the smartphone is safely fixed
within the housing before use.
- Keep this product out of reach of
children.
- The product is intended for private,
non-commercial use only.
- Do not drop the product and do not
expose it to any major shocks.
- Do not operate the product outside the
power limits given in the specifications.
- Dispose of packaging material imme-
diately according to locally applicable
regulations.
- Since the battery is integrated and can-
not be removed, you will need to dispose
of the product as a whole. Do this in
compliance with the legal requirements.
- Only use suitable charging devices or
USB connections for charging.
- Do not overcharge the product or allow
the battery to completely discharge.
- When stored over a long period of time,
batteries should be charged regularly (at
least every three months).
II. Scope of delivery
- Solar Power-Case 2500 mAh
- USB charging cable
- Headphone/headset adapter
- User manual
III. Technical specifications
- Input USB:
- Input solar:
- Output:
- Capacity:
- Battery type:
- Charging time
iPhone6:
6
5V
1000mA
5V
500mA max.
5V
1000mA
2500mAh 9,25 Wh
Lithium-Polymer
2 hours
IV. Compatibility/Requirements
- This product is compatible to following
devices: iPhone 6, iPhone 6s
V. Picture description
1.
Closing mechanism of the smartpho-
ne fixation
2.
Mute button
3.
Volume switch
4.
Headset/headphone opening
5.
On/off switch
6.
LED Indicator
7.
Micro USB connector
8.
Camera opening
9.
Lightning connector
10. Speaker opening
11. Solar input display
12. Opening button to the solar cells
13. Solar cells
14. Charging cable: USB connector type-A
15. Micro-USB connector
16. Headphone/headset adapter
VI. Operation
- Remove if necessary protection cases,
bags and other accessories from your
smartphone.
- Open the opening mechanism of the
case. (A)
- Remove the upper frame of the case as
described. (B)
- Push the smartphone carefully into the
case. (C)
- Connect the removed part with the case
again and close the closing mechanism
on both sides. (D)
- Connect the plug of the supplied cable
(15) with the related charging connector
(7).
- Connect the other side of the cable (14)
with a suitable source of energy. Always
consider the mentioned voltage and
power information on your devices in
this step.
- Charge the power bank battery until the
status LED's (6) permanently lights up.