Austro Flamm 55x55x Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Крытый камин Austro Flamm 55x55x. Austro Flamm 55x55x 10 страниц. Inserts
Также для Austro Flamm 55x55x: Руководство по эксплуатации (17 страниц)
Печатать страницу
3. operating elements
The insert series of 45x, 55x, 65x, 75x, 55x55x stands out because of the extremely simple operation.
convection air in-/outlet
possible deflection damper
(for deflecting flue gases into heat exchanger)
or throttle valve
door lock
operating lever for combustion air flap
combustion/convection air inlet
4. operating symbols/operation
operation lever for combustion air flap
+ = maximum air supply for fast burning
I = average heat output
– = small heat output
hinged door mechanism
press handle outwards
o
pull open
o
door can be swung open
o
– „release":
Release the door handle in an open position (angle > 20°), door closes and locks
automatically.
sliding door mechanism
–
lift = door open
–
pull down = door closed
deflection damper for heat exchanger
– turn to the right: flue gases will be conducted into the heat exchanger.
This may be executed only if the insert door is closed.
– turn to the left: flue gases will be conducted directly into the chimney. The insert door may be opened only in
this position.
throttle valve
– turn to the left: flap closes.
– turn to the right: flap opens. Flue gases exit through the chimney. The insert door
may be opened now.
5. fuel
allowed fuel
dry, well-seasoned and natural wood (preferably hard wood) or wood briquettes.
Clean combustion
The fuel wood must be dry (wood moisture < 15 %) and untreated. Moreover it is very important to use the
correct quantity of wood, in order to reach a clean and low-emission combustion. Apart from a low caloric value,
moist wood also makes your insert's glass panes soot faster than necessary. A sooting after 2-3 times of use is
normal. If you use fuel for heating which is not allowed, all guarantee or warranty claims ends
immediately!
4